Multipacting Growth in Waveguide (multipactingGrowth.sdf)

Keywords:

multipacting

Problem description

Multipacting, which is the resonant buildup of secondary electrons, is often a concern in microwave devices. Anytime there is an oscillating electromagnetic field across a gap between two surfaces there exists the possibility that for the right voltage across the gap a resonance condition will exist allowing the exponential buildup of secondary electrons. A coaxial waveguide is such a type of structure where these conditions can exist.

This simulation can be performed with the VSimVE or VSimPD license.

Opening the Simulation

The Multipacting Growth example is accessed from within VSimComposer by the following actions:

  • Select the NewFrom Example… menu item in the File menu.

  • In the resulting Examples window expand the VSim for Microwave Devices option.

  • Expand the Multipacting option.

  • Select “Multipacting Growth in Waveguide” and press the Choose button.

  • In the resulting dialog, create a New Folder if desired, and press the Save button to create a copy of this example.

All of the properties and values that create the simulation are now available in the Setup Window as shown in Fig. 459. You can expand the tree elements and navigate through the various properties, making any changes you desire. The right pane shows a 3D view of the geometry, if any, as well as the grid, if actively shown. To show or hide the grid, expand the Grid element and select or deselect the box next to Grid.

Setup Window

Fig. 459 Setup Window for the Multipacting Growth example.

Simulation Properties

This example contains a number of Parameters to allow for easy manipulation of the device. Those include:

  • R_O: The outer coax radius

  • R_I: The inner coax radius

  • FREQUENCY: The wave launcher frequency

SpaceTimeFunctions are used to create expressions defining the drive frequency and amplitude of the applied field.

CSG is used to create the coax structure by combining cylinders and cubes.

Running the simulation

After performing the above actions, continue as follows:

  • Proceed to the run window by pressing the Run button in the left column of buttons.

  • Check that you are using these run parameters:

    • Time Step: 9.703189536968598e-13

    • Number of Steps: 25600

    • Dump Periodicity: 6400

    • Dump at Time Zero: Checked

  • Click on the Run button in the upper left corner of the right pane.

You will see the output of the run in the right pane. The run has completed when you see the output, “Engine completed successfully”. This result is shown in Fig. 460

Run Window

Fig. 460 The Run Window at the end of execution.

Visualizing the results

After performing the above actions, continue as follows:

  • Proceed to the Visualize Window by pressing the Visualize button in the left column of buttons.

To view growth in the number of electrons, as shown in Fig. 461, do the following:

  • Select History from the Data View pull down menu

  • Set Graphs 1&2 to “None”

  • Graph 3 should already be set to numElectrons (if not, set it)

The overall trend in the number of electrons is an exponential growth with an oscillatory signal that corresponds to the frequency of the traveling wave.

Visualize Window

Fig. 461 Visualization of the exponential growth of the electrons due to multipacting.

Further Experiments

Try changing the gap voltage or the frequency of the wave to see if one can take the simulation in and out of resonance.