2.4 GHz Yagi Uda Antenna (YagiUda2p4.sdf)

Keywords:

yagiUdaArrayWireModel, yagiT, far field, radiation

Problem description

A Yagi-Uda array is a directional antenna consisting of several parallel dipole elements. Only one of these dipole elements is driven, the other elements being parasitic . Directionality is achieved by requiring that there be one longer element adjacent to the source element, which is referred to as the reflector. The rest of the elements being adjacent to the source but opposite to the reflector, and shorter than the source element, are referred to as directors. Yagi antennas are ubiquitous, and as such optimal parameters for dipole lengths and separations have been established. We go with values one would typically find in any text covering the matter. This example illustrates how to obtain the far field radiation pattern of a Yagi-Uda array.

This simulation can be performed with a VSimEM license.

Opening the Simulation

The Yagi-Uda example is accessed from within VSimComposer by the following actions:

  • Select the NewFrom Example… menu item in the File menu.

  • In the resulting Examples window expand the VSim for Electromagnetics option.

  • Expand the Antennas option.

  • Select 2.4 GHz Yagi Uda Antenna and press the Choose button.

  • In the resulting dialog, create a New Folder if desired, and press the Save button to create a copy of this example.

All of the properties and values that create the simulation are now available in the Setup Window as shown in Fig. 196. You can expand the tree elements and navigate through the various properties, making any changes you desire. The right pane shows a 3D view of the geometry, if any, as well as the grid, if actively shown. To show or hide the grid, expand the Grids element and select or deselect the box next to Grid.

Setup Window

Fig. 196 Setup Window for the Yagi-Uda example.

Simulation Properties

This file allows the modification of the antenna operating frequency, antenna dimensions, and simulation domain size.

By adjusting the dimensions any sized Yagi-Uda array can be simulated.

Note

To obtain good far field resolution generally four or more antenna elements is desirable (One source, one reflector, two or more directors).

Running the Simulation

After performing the above actions, continue as follows:

  • Proceed to the run window by pressing the Run button in the left column of buttons.

  • Check that you are using these run parameters:

    • Time Step: 9.655996046470038e-13

    • Number of Steps: 6000

    • Dump Periodicity: 200

    • Dump at Time Zero: Checked

  • Click on the Run button in the upper left corner of the right pane.

You will see the output of the run in the right pane. The run has completed when you see the output, “Engine completed successfully”. This result is shown in Fig. 197.

Run Window

Fig. 197 The Run Window at the end of execution.

Analyzing the Results

  • Proceed to the Analysis window by pressing the Analyze button in the left column of buttons.

  • Select computeFarFieldFromKirchhoffBox.py from the list and select “Open” (Fig. 198)

  • Input values for the analyzer parameters. The analyzer may be run multiple times, allowing the user to experiment with different values.

    • simulationName - yagiUda2p4

    • fieldLabel - E

    • farFieldRadius - 1024.0

    • numPeriods - 0.25

    • numFarFieldTimes - 2

    • frequency - 2.4e9

    • numTheta - 45

    • numPhi - 60

    • zeroThetaDirection - (0,1,0)

    • zeroPhiDirection - (0,0,1)

    • incidentWaveAmplitude - blank

    • incidentWaveDirection - (0,0,0)

    • varyingMeshMaxRadius - 1024.0

    • principalPlanesOnly - checked

  • Click “Analyze”

  • Depending on the values of numTheta, numPhi, and numFarFieldTimes, the script may need to run for several minutes.

Analysis Window

Fig. 198 The Analysis Window.

Visualizing the results

Proceed to the Visualize Window by pressing the Visualize button in the left column of buttons.

To view the near field pattern, do the following:

  • Expand Scalar Data

  • Expand E

  • Select E_x

  • Check the Set Minimum box and set the value to -0.1

  • Check the Set Maximum box and set the value to 0.1

  • Check the Clip Plot box

  • Expand Geometries

  • Select poly (YagiUda2p4PecShapes)

  • Move the dump slider forward in time

Visualize Window

Fig. 199 The electric field near-field pattern.

The far field radiation pattern can be found in the scalar data variables of the data overview tab underneath the farE field. Uncheck the E_x dataset and check the farE_magnitude box under farE.

Visualize Window

Fig. 200 The electric field manifestation of the far field pattern.

Further Experiments

Try adding more directors and changing their dimensions to see the effect on the far field pattern.